Lite Version 4K30Hz HDBaseT HDMI Extender With KVM

The MSLFORCE OEM New HBDT-HD-70TX/RX-MTK is an HDBaseT technology Extender, it supports no compression, no losses, no latency HDMI signal transmission. It can can work with other HDBaseT equipment, such as Sony HDBaseT projector. All the signals are transmitted by one single CAT5E/ CAT6/ CAT7 cable, for 1080P it can transmit to a distance of 70m(230ft), for 4K60Hz(4:2:0) it can up to 35m(115ft). Compatible with all the HDTV resolutions, HDCP2.2 protocol. It also supports bi-directional RS232 and IR transmission and realize the long distance control. Supports power over cable, users only need to power one side; It can be popularly used in media conferencing room, school, government, cinema and so on applications.

Connection Diagram:

HDMI Source (e.g., PC, Media Player, Blu-ray Player):

Connect the HDMI output from your source device to the HDMI input on the HDBaseT Transmitter.

HDBaseT Transmitter:

Connect the HDMI input port to the source device.

Use a Cat5e/Cat6 Ethernet cable to connect the transmitter to the HDBaseT Receiver over a distance (up to 70–100 meters, depending on the model and cable quality).

Power the transmitter if required (some models may support PoE).

HDBaseT Receiver:

Connect the other end of the Ethernet cable to the receiver.

Power the receiver if it isn't powered by PoE.

Connect the HDMI output on the receiver to the HDMI input on your display device (e.g., TV, Projector, Monitor).

Display Device:

Connect the HDMI cable from the receiver to the display's HDMI input.

Learn more details : 4K lite version HDbaseT Extender KVM