USB C Dock HUB with Detachable USB-C Cable, 12 in 1 USB C Dock to 2Ports*4K@60hz HDMI, 2Ports USB 3.0, SD/Micro SD , 1Port USB TYPE-C Data 5Gbps , 2Ports USB TYPE-A 2.0 HUB , Audid 3.5mm, 100W PD and M.2 SDD PCIe SATA-III Enclosure design. Compatible for MacBook Pro , MacBook Air , Imac pro and Mac accessorie
Send Inquiry
Description
Technical Parameters
Elegant business style: Detached Type-C M to M Cable
It is a USB 3.2 Type-C Gen2 Full-featured cable with speed up to 10Gbps; E-marked IC and Vbus current capability up to 20V5Amp.
New Design for your sales at 1st quarter of 2022 . 12 IN 1 USB C Dock with M.2 SDD Enclosure
USB C 12 IN 1 Dock
USB3.2 Gen2 Dock Station with a Detached C2C Cable 0.7M
Upstream :
USB 3.2 GEN2 Port , Compatible with Thunderbolt 3 , USB 4
Downstream :
Video output 2ports * HDMI 4K@60HZ
Data output USB TYPE-A 5Gbps / USB TYPE-A 480Mbps / USB TYPE-C 5Gbps
Audio output 3.5mm aux auido port
Data Read & Write SD / Micro SD card reader
PD 20V5A@100W charging port
M.2 SDD Enclosure 10G SATA-III and PCI-E Protocol
PCI-E and SATA-III SDD Enclosure USB C HUB DOCK
Tool-free design
Solid performance
Tough and thermal efficient design
Detachable USB Type C
Compatibility with USB-C / Thunderbolt 3 chipsets / ports
Bringing Portable Convenience to NVMe SSDs
DIY hard drive and SSD enclosures are an uncomplicated way to build an external drive of your own, and they're convenient little devices to repurpose your older storage for your on-the-go lifestyle, or they're great for just plain old backup purposes.
That is our originally designed to be embedded the SDD Enclosure in our Preminum 4k@60hz 11 in 1 USB C Dock hub
it can transfer data at up to 10Gb/s, or upwards of about 1GB/s, courtesy of the USB Type-C interface, USB 3.1 Gen 2 spec, and the USB Attached SCSI Protocol (UASP). The enclosure is compatible with USB Type-A and Thunderbolt 3 ports, too, but is limited to 5Gb/s on USB Type-A (USB 3.1 Gen 1) ports.
The enclosure supports TRIM and S.M.A.R.T. attribute passthrough. Additionally, it is compatible with M.2 M-key SSDs ranging from 30mm in length up to 80mm.
The unit is typically fully bus powered, so no extra cables are needed besides the single USB Type-C cable.
Connector insertion and dialing times More than 3000 times
Meet the standard It supports USB 3.1 Gen2 (theoretical rate 10Gbps) and is downward compatible with USB3.0, USB2.0 and USB1.1
working voltage DC 5V ± 5% ripple ≤ AC 100mV
transmission speed The theoretical maximum transmission rate can reach 10Gbps
Carrying capacity Requirement ≥ 5V / 900mA
Hot plug function Support hot dialing
Charging function Bc1.2 protocol, up to 2.4a, supports apple and Samsung
Actual read / write speed Read: ≥ 900mb / s, write: ≥ 900mb / S
overload protection Over current protection and short circuit protection are not supported
HDMI Specifications :
Connector HDMI AF base, sink plate, black rubber core, nickel plating on iron shell, pin for gold plating 1U
Dialing times More than 3000 times
Meet the standard It complies with hdmi2.0b protocol specification and supports maximum resolution 4K@60Hz , downward compatible 4K@30Hz 、 1080P@60Hz 、 720P@60Hz Etc., support hdcp1.4 / 2.2
working voltage DC 5V ± 5% ripple ≤ AC 100mV
transmission speed Maximum theoretical value: 18gbps
HDMI resolution Maximum resolution support 4K@60Hz , downward compatible 4K@30Hz ,2560* 1440@120Hz ， 1080P@144Hz ， 1080P@60Hz ， 720P@60Hz etc.
HDMI output line length requirements HDMI output 4K@60Hz The shortest line length shall be greater than 3m 30awg;
HDMI output 4K@30Hz When the resolution is, the shortest line length shall be greater than 5m 28Awg;
HDMI output 1080P@60Hz The shortest line length shall be greater than 10m and 28Awg
Identify EDID support
3D video playback support
HDCP1.4/2.2/2.3 support
Hot plug function Support hot plug
Audio format Support DTS, DSD, Dolby AC3 5.1 and 7.1 channels, with the highest audio sampling rate of 192Khz and 24bit
